14 inch Replacement INCOLOY Special Double Bend Immersion Heater
30inch element including 11 inch INCOLOY Thermostat
2 1/4 BSP Dual Safety RoHS EN 60335-2-73 Approved
Suitable for Medium to Hard Water Areas - A must of Economy 7 cylinders
14 inch Double Bend gives effectively a 30 inch element in a 14 inch space.
The surface area is the same as the 30 inch model , and allowing insertion into side mounted cylinders.
RoHS compliant - BEAB Approved- Registration number E9573 - BS EN ISO 9001
Approved - Registration number 9902479 - 3KW 2 1/4 BSP
Guaranteed 12 months, providing correctly installed and only subject to Normal operating conditions
Incoloy heater AND thermostat - Dual Safety Thermostat EURODUAL
Anti-Corrosion Beware of INCOLOY immersion heaters with copper thermostats at lower prices
These are not suitable for hardwater areas or Stainless Steel Cylinders
The manufacturers of Stainless Steel Cylinders all now advocate that ONLY INCOLOY OR Titanium elements WITH AN INCOLOY THERMOSTAT POCKET are fitted. You will find a guarantee exception if one is NOT fitted, then the cylinder warranty will become invalid.
The main reason for needing an element with an INCOLOY thermostat pocket instead of the normal copper one, is that there can be electrolytic reactions between the copper and the stainless steel.
Hard Water Areas - In areas of harder water, INCOLOY is recommended for use due to the resistive properties.
Severe Water Areas - Titanium should be used.
The warranty will NOT be honoured if the wrong type of element has been found to be fitted in an area of hard water.
We also have Titanium Immersion heaters listed in our shop.
Part P disclaimer regarding fitting of Immersion Heaters and thermostats. It is a legal requirement that these units are fitted by a competent and suitably qualified person in accordance with Part P of the Building regulations and that installations are compliant with all local,national rules and the IEE wiring regulations.