23" Immersion Heater INCOLOY including 18 inch INCOLOY Thermostat Stat BEAB Approved 3KW 2.25 BSP Dual Safety RoHS EN 60335-2-73 Approved
BEAB Approved - Registration number E9573
BS EN ISO 9001 Approved - Registration number 9902479
Complies with European safety standard, EN 60335-2-73
Guaranteed 12 months, providing correctly installed and only subject to Normal operating conditions
Incoloy heater AND thermostat
Dual Safety Thermostat EURODUAL Anti - Corrosion
Beware of INCOLOY immersion heaters with copper thermostats at lower prices;
These are not suitable for hard water areas or stainless steel cylinders
Stainless Steel Cylinders
The manufacturers of Stainless Steel Cylinders all now advocate that ONLY INCOLOY OR Titanium elements WITH AN INCOLOY THERMOSTAT POCKET are fitted. You will find a guarantee exception if one is NOT fitted, then the cylinder warranty will become invalid. The main reason for needing an element with an INCOLOY thermostat pocket instead of the normal copper one, is that there can be electrolytic reactions between the copper and the stainless steel.
Hard Water Areas
In areas of harder water, INCOLOY is recommended for use due to the resistive properties.
Severe Water Areas
Titanium should be used. The warranty will NOT be honoured if the wrong type of element has been found to be fitted in an area of hard water
We have Titanium Immersion heaters listed in our shop:
Part P disclaimer regarding fitting of Immersion Heaters and thermostats.
It is a legal requirement that these units are fitted by a competent and suitably qualified person in accordance with Part P of the Building regulations and that installations are compliant with all local, national rules and the IEE wiring regulations.