Thomas Dudley Vantage Insulated Pneumatic Concealed Cistern — 320433
The Thomas Dudley 320433 (Vantage series) is a factory-assembled, WRAS-approved pneumatic dual-flush concealed toilet cistern encased in a moulded polystyrene insulation jacket to prevent surface condensation inside fitted bathroom furniture, tiled boxing, and stud partition walls. Supplied with a Dudley Niagara dual-flush valve and a compact 1/2" BSP (~20.9mm OD) side-entry Hydroflo inlet valve with integral isolator, it provides quiet, water-saving performance and effortless front or top maintenance access.
Identification & Technical Guide:
Brand: Thomas Dudley | MPN: 320433 (Vantage Insulated) | Internal Reference: FTB13498 | Dimensions: 460mm (W) × 369mm (H) × 125mm (D) | Inlet & Flush Volumes: 1/2" BSP (20.9mm OD) Side Inlet / 6/4L, 5/3L & 4/2.6L Dual Flush | Compatibility: Fitted bathroom furniture units, ducting & stud partition walls (compatible with Dudley pneumatic push buttons & flush plates)
Key Features
- Full Polystyrene Insulation Jacket: Prevents moisture condensation dripping inside timber vanity units, MDF furniture carcasses, and plasterboard voids.
- Convertible 6/4L, 5/3L & 4/2.6L Dual Flush: Factory-set to 6/4 litres and easily convertible pre- or post-installation to 5/3L or 4/2.6L to meet BREEAM water-efficiency targets.
- WRAS-Approved Factory Internals: Pre-fitted with the Dudley Niagara pneumatic dual-flush valve, Hydroflo compact side-entry fill valve, and internal shut-off isolator.
- Front & Top Service Access Panels: Removable top lid and front inspection hatch allow complete internal valve servicing without dismantling bathroom furniture.
Installation & Compatibility Notes
Scope & Actuation Notice: Supplied as the cistern assembly only (includes push-fit inlet elbow and push-fit flush pipe bend—flush buttons, flush plates, and mechanical levers are NOT included). Requires a pneumatic dual-flush button or plate; not suitable for traditional mechanical lever handles.
Fitting Advice: Connect the 1/2" BSP (~20.9mm OD) water supply via the supplied push-fit elbow, ensuring the internal isolating valve remains accessible through the front or top service hatch. Route the pneumatic air tubes smoothly without sharp kinks or pinching before closing the furniture fascia.
Compatible Actuators & Replacement Spares
- Compatible Flush Valves: Thomas Dudley Niagara Pneumatic Dual Flush Valve (pre-installed)
- Compatible Inlet Valves: Thomas Dudley Hydroflo Compact 1/2" BSP Side Entry Fill Valve (pre-installed)
- Compatible Push Buttons & Plates: Thomas Dudley Vantage Pneumatic Dual Flush Push Buttons (Chrome, Black, Brushed Brass) & Dudley Pneumatic Flush Plates



