PRODUCT FEATURES
SEDAL 40mm Single lever cartridge Standard 40mm EN-40 S/D 08EN40FAZ00
This cartridge is used in kitchen sink, bath and basin Single lever taps.
This listing is for genuine good quality SEDAL European cartridges direct from the Spain factory as used by Ideal Standard, Bristan, Franke Armitage Shanks
unlike many of the other suppliers selling Chinese cartridges sold on Amazon / Ebay. This cartridge generally fits single level monobloc style, and works with approx.. 90% of taps supplied today by leading manufacturers
If you have a leaking tap that is coming from the spout then this is 99.9% of the problem
Taps leak due to limescale scratching the ceramic surface particularly in hard water areas and over time the leak gets worse and worse until a replacement is needed. You can measure the size of your cartridge to make sure that this fits by removing the existing one.
Also look at the both Dimensions pictures
Nut torque/Pitch M1,5: 10 - 12 N.m
Opening angle: 25 degree
Rotation angle : 100 degree
Working pressure(recommended): 1 – 5 bar
Burst pressure : 55 ÷ 65 bar
Life cycle
EN 817: 70,000 cycles
ASME 112.18.1 M : 500,000 cycles
Sensitivity : 16degree ÷ 17 degree angle
Constant 63oC & 50oC (6 l/min-3 l/min) : 0,8°C – 1,7 oC
Max. Hot water : 90 oC