Be sure to sure this flange is long enough to go through the wall and past the kitchen cabinets, otherwise buy one of our FixTheBog kits with the 450mm or 600mm flange
THIS KIT COMES COMPLETE WITH:-
1 X HOSE UNION OUTSIDE TAP with Double Check Valve
1 X 15mm John Guest Speedfit COMPRESSION x 3/4 BSP TEE with EASY TURN ISOLATING VALVE
1 X 15mm THRU-WALL FLANGE 365mm Long
4 X 2" X 8 BRASS COUNTERSUNK SLOTTED FIXING SCREWS.
4 X BROWN PLASTIC PLUGS 1 X ROLL PTFE TAPE
1 x 300mm 3/4BSP to 15mm Push Fit Flexi connector
1 x Set of FixTheBog Branded fitting Instructions
If this Kit is not exactly what you need; Check out FixTheBog other tapkits! The Kit provides a professional way to add an outside garden tap. We have found this Kit allows the average DIY person to fit an outside tap; This Kit is superior to many of the kits sold in DIY stores, eBay or Amazon which have self-tapping tee's which often in 18months tend to leak.
These kits give a professional finish, the through the wall flange has several advantages over the wall plate type fixing. There is no exposes pipework to freeze in winter.
Give The Tap 8-10 wraps of PTFE tape and tightened onto the Flange before fitting, making sure it a good fit and vertical. Please do not use a spanner or wrench; it only needs to be hand tight
The Kit works on modern 15mm or old 1/2 inch copper. The isolation valve must be fitted above the lever of the outside tap to ensure, that during winter, the garden tap can drain, this preventing the outside tap freezing. Please note specific plastic items colours may vary. GT1ALT Tap Kit
