Honeywell 28mm 3-Port Mid-Position Valve — V4073A1088
The Honeywell Home (Resideo) V4073A1088 is an authentic 28mm compression 3-port mid-position motorised diverter valve engineered for fully pumped domestic and light-commercial hydronic central heating systems (standard Y-Plan). Designed to provide independent or simultaneous flow control over central heating radiators and domestic hot water storage cylinders, it features a quick-change removable electrical powerhead that unclips and replaces without breaking into pipework or draining the heating system.
Identification & Technical Guide:
Brand: Honeywell Home / Resideo | MPN: V4073A1088 | Internal Reference: FTB6160 | Pipe Connection: 28mm compression ends (1" BSP equivalent threads / ~33.2mm OD) | Electrical Rating: 230V AC 50Hz, 6W power consumption, 1-metre 5-core flying lead | Compatibility: Fully pumped Y-Plan heating systems utilizing 28mm copper pipe (BS EN 1057)
Key Features
- Versatile Three-Position Operation: Internal elastomer shoe modulates flow accurately between Port A (Heating only), Port B (Hot Water only), or mid-position shared flow (Both simultaneously).
- Dry-Change Replaceable Powerhead: Actuator head unclips via two securing screws directly from the brass casting without draining water from the heating circuit.
- Integrated Manual Latching Lever: Side lever allows manual valve opening for system filling, gravity draining, or emergency boiler testing during electrical power loss.
- High-Flow 28mm Brass Body: Forged brass body delivers low hydraulic resistance (approx. 8.1 Kv flow factor) ideal for larger domestic properties, heat-only boilers, and system boiler primary circuits.
Installation & Compatibility Notes
Port Identification Notice: Port AB is the central common inlet from the boiler flow pipe. Port A connects to the central heating radiator circuit. Port B connects to the hot water cylinder indirect coil. Mounting the valve reversed will result in incorrect room/cylinder thermostat switching and back-circulation.
Mounting & Filling Advice: The valve must not be installed upside-down (actuator head beneath the brass body) to protect electrical components from condensation or weeping glands. Move the manual lever to the locked "MAN OPEN" detent position prior to filling and venting the heating system.
Compatible Replacement Spares
- Replacement Actuator Powerhead: Honeywell 40003916-003 (V4073A replacement head)
- Internal Wet-Side Overhaul Kit: Honeywell 272752A/U (replacement rubber shoe ball, O-rings, and top cover plate)
- Replacement Drive Motor: Synchronous motor 230V AC for Honeywell valves



