Grohe Servo Discharge Flush Valve — 43486000 (43486 / BG43486)
The Grohe 43486000 (43486 / trade ref BG43486) is the authentic OEM pneumatic servo discharge valve engineered for Grohe GD2 and Rapid SL (6–9L) concealed cisterns configured for single-flush or start/stop actuation. Supplied complete with its adjustable overflow standpipe and factory-fitted base sealing washer, it restores crisp flush initiation, mid-cycle flush interruption, and a watertight drop seal without removing wall tiles or dismantling the concealed frame.
Identification & Technical Guide:
Brand: Grohe | MPN: 43486000 (43486) | Trade / Supplier Ref: BG43486 | Flush Volume: Adjustable 6–9 Litres (Single Flush / Start-Stop) | Actuation: Pneumatic Servo Operation | Compatibility: Grohe GD2 & Rapid SL 6–9L concealed cisterns (including 38525, 38661 & 38721 series)
Key Features
- Single-Flush & Start/Stop Actuation: Engineered for Grohe GD2 cisterns fitted with single-flush or start/stop pneumatic flush plates (press once to flush, press again to stop early).
- Adjustable 6–9L Flush Volume: Built-in overflow pipe and float adjustment allow precise calibration between 6 and 9 litres to match ceramic pan requirements.
- Bayonet Twist-Lock Servicing: Drops straight into the existing cistern base basket through the front or top flush plate inspection aperture without breaking tiles.
- Factory-Fitted Silicone/EPDM Base Seal: Includes Grohe's 63mm × 32mm base sealing ring (43537000) to eliminate continuous water trickle into the WC bowl.
Installation & Compatibility Notes
Actuation & Scope Notice: This is a Single-Flush / Start-Stop servo valve only (flush plate and air hose are not included). It is NOT suitable for 6/3L dual-flush AV1 cisterns (use 42314000 or 42320000 for dual-flush AV1 systems).
Fitting Advice: Isolate the internal cistern angle valve, unclip the pneumatic air connection from the top of the old valve, and twist the body anti-clockwise to release it from the base basket. Wipe any limescale deposits from the lower outlet cradle before locking the new 43486000 valve clockwise into place.
Compatible Cisterns & Associated Spares
- Compatible Cisterns & Frames: Grohe GD2 Concealed Cisterns (6–9L), Grohe Rapid SL Frames (including 38525, 38661, and 38721 single-flush/start-stop setups)
- Replacement Base Sealing Washer: Grohe 43537000 Base Sealing Ring (63mm OD × 32mm ID)
- Compatible Flush Plates: Grohe Skate, Surf, and Scala single-flush & start/stop pneumatic plates



