Grohe Servo Discharge Valve (Start/Stop) — 42690000 (42690)
The Grohe 42690000 (42690) is the authentic OEM pneumatic servo discharge flush valve engineered for Grohe concealed cisterns configured for single-flush and start/stop water-saving actuation. Supplied as the main drop-valve body assembly (without valve seat cradle or overflow extension), it restores crisp flush initiation, mid-cycle flush interruption, and a watertight drop seal on classic Grohe GD1, GD2, and DAL Adagio concealed installations without removing tiles or breaking into the wall void.
Identification & Technical Guide:
Brand: Grohe | MPN: 42690000 (42690) | Internal Reference: FTB13388 | Flushing Action: Single Flush with Start/Stop Water-Saving Actuation | Supplied Configuration: Servo discharge valve assembly only (no base seat basket or extension pipe) | Compatibility: Grohe GD1, GD2 (start/stop / single-flush), and DAL Adagio concealed cisterns
Key Features
- Start/Stop Flush Control: Allows the user to press once to initiate a full flush and press a second time to halt water discharge early for immediate water conservation.
- Direct Bayonet Cradle Fitment: Supplied without the lower outlet seat basket or upper pipe extension for rapid drop-in servicing into existing intact Grohe cistern seats.
- Factory-Fitted Base Sealing Washer: Equipped with Grohe's flexible EPDM/silicone base seal (63mm OD × 32mm ID) to eliminate continuous water trickle into the WC pan.
- Genuine Grohe Engineering: Precision-moulded German polymer construction resists mineral scale binding and ensures reliable pneumatic servo actuation.
Installation & Compatibility Notes
Configuration & Scope Notice: This is a Start/Stop single-flush servo valve supplied without a valve seat basket or pipe extension. It is designed for Grohe GD1, GD2, and Adagio cisterns using start/stop or single-flush actuation—it is NOT a 6/3L dual-flush AV1 valve (for dual-flush AV1, use 42314000 or 42320000).
Fitting Advice: Isolate the internal cistern stopcock, disconnect the pneumatic/actuation connection, and release the old valve from the base cradle through the flush plate aperture. Inspect the existing base seat for limescale deposits and wipe clean before locking the replacement 42690000 securely into position.
Compatible Cisterns & Associated Spares
- Compatible Cistern Ranges: Grohe GD1 Concealed Cisterns, Grohe GD2 Start/Stop Cisterns, Grohe DAL Adagio Concealed Cisterns
- Replacement Base Sealing Washer: Grohe 43537000 Base Sealing Ring (63mm OD × 32mm ID)
- Compatible Flush Plates: Grohe Skate, Surf, and Scala start/stop & single-flush pneumatic actuation plates



