Fluidmaster Schwab UP 189 Mechanical Concealed Cistern (Tank Only) — 650022
The Fluidmaster Schwab 650022 (UP 189 series) is a genuine OEM 120mm-depth insulated concealed toilet cistern engineered for front-actuated mechanical dual-flush installations (5/6/7L large flush and 3/4L small flush). Supplied factory-assembled with internal mechanical flush valves and the quiet-filling Fluidmaster 747 side-entry inlet valve, it includes a DN 15 (1/2" BSP / 20.9mm OD) angle stop valve, 300mm flush pipe, and mounting brackets to deliver condensation-free, water-saving performance inside bathroom furniture and stud walls.
Identification & Technical Guide:
Brand: Fluidmaster / Schwab | MPN: 650022 (Series: UP 189) | Internal Reference: FTB13505 | Inlet & Depth: DN 15 (1/2" BSP / ~20.9mm OD) Angle Valve / 120mm Cistern Depth | Actuation & Flush: Mechanical Front Actuation Only (Not Pneumatic) / Dual Flush (5/6/7L & 3/4L) | Compatibility: Schwab UP 189 concealed installations & compatible Schwab mechanical front dual-flush plates (exact overall height/width unconfirmed — verify against dimensional drawing before boxing in)
Key Features
- Factory-Fitted Fluidmaster 747 Fill Valve: Renowned debris-resistant diaphragm inlet valve delivers fast, whisper-quiet tank refilling across varying mains pressures.
- Full Anti-Condensation Insulation: Moulded insulating jacket eliminates moisture condensation dripping behind tiled walls or inside MDF bathroom furniture.
- Adjustable Mechanical Dual-Flush Volumes: Configurable for 5L, 6L, or 7L full flush paired with a 3L or 4L water-saving reduced flush.
- Flexible Water Supply Routing: Multiple knock-out/connection points (top-left, top-middle, top-right, or right-side entry) with supplied DN 15 (1/2" BSP) angle valve.
Installation & Compatibility Notes
Mechanical Actuation & Tank Only Notice: This cistern uses mechanical lever/rod actuation (NOT pneumatic air hoses) and is designed strictly for front activation. Supplied as the cistern tank, internal valves, DN 15 angle valve, 300mm flush pipe, and mounting brackets only—flush plate, push button, and external steel WC frame are NOT included.
Fitting Advice: Connect the 1/2" BSP (~20.9mm OD) water feed via the supplied DN 15 angle isolating valve, ensuring the shut-off valve and internal fill/flush valves remain easily accessible through the front flush plate aperture once tiled or panelled.
Compatible Components & Associated Spares
- Pre-Installed Inlet Valve: Fluidmaster 747 Side-Entry Filling Valve
- Included Pipework & Fittings: DN 15 (1/2" BSP) Angle Isolating Valve, 300mm Flush Pipe, and Wall Mounting Brackets
- Required Actuator (Sold Separately): Compatible Fluidmaster Schwab UP 189 Mechanical Front Dual-Flush Plate (e.g., Schwab Vela, Gala, or Meta mechanical series)



