Simple DIY upgrade using the existing basket just click out old flush and in with the new Replacement for the popular Twico flush.
If your existing Geberit valve basket is in good shape, this is a simple flush valve upgrade.
If. the basket is broken, then you will need to purchase our SKU FTB2781
Simple installation allows you to effortlessly switch over the working parts, without having to unbolt the pan from the cistern. The existing cradle in your cistern will fit the new valve.
Isolate the cold water supply, either by turning off the water or isolating close to the toilet cistern.
Then remove the old valve by locating the two tabs (about a quarter of the way up from the bottom) and pushing them with your thumb and index finger to remove. The existing flush valve can be removed from the cradle with a simple twist.
To fit the new valve, reverse the process.
The new valve is adjustable in height allowing for any sized cistern once you have the height set the button screw in through the top of the cistern lid to secure it.
Direct Replacement for 261.157.00.1 E003167
Will fit existing Impuls280 cradle or complete valve refurbish
Height adjustable 312mm to 415mm
Button will fit standard 38-45mm holes Includes cradle,
Dual flush Small and large flush volume can be set depending on the amount of water in the cistern Overflow pipe height-adjustable With lid attachment
The Impuls280 valve was used by many manufacturers like Kohler,Ideal Standard, Duravit, RAK, Laufen, Sottini, Pozzi-Ginori, Vitra, Villeroy & Boch and many more