FixTheBog Kardier 1/2" BSP Side Inlet Fill Valve (1860 & Infinity Model One Frames)
The FixTheBog Kardier Fill Valve is a compact side-entry replacement inlet filling valve engineered for both the Kardier 1860 High Wall Hung Toilet Frame and the Infinity Model One Low Toilet Frame. Equipped with a standard 1/2" BSP (20.9mm OD) plastic threaded side water connection, it restores smooth, quiet, and consistent cistern refilling while conserving water and eliminating leaks or continuous overflowing caused by worn-out float valves.
Identification & Technical Guide:
Brand: FixTheBog (Kardier) | Water Inlet & Thread: Side Inlet — 1/2" BSP (20.9mm OD) Plastic Thread | Compatibility: Kardier 1860 High Wall Hung Toilet Frame & Infinity Model One Low Toilet Frame
Key Features
- Dual Concealed Frame Compatibility: Purpose-built for the Kardier 1860 High Wall Hung Toilet Frame and Infinity Model One Low Toilet Frame.
- Side-Entry 1/2" BSP (20.9mm OD) Plastic Thread: Connects directly to standard 1/2" BSP side water supply fittings inside the concealed cistern housing.
- Quiet, Consistent & Water-Efficient Refilling: Delivers controlled tank filling with positive shut-off to minimise fill noise and prevent water waste.
- Compact, Low-Maintenance Build: Sturdy construction engineered to fit neatly inside slim wall-hung cistern enclosures with minimal long-term wear.
Installation & Compatibility Notes
Frame & Side-Inlet Verification: Engineered specifically for side-entry 1/2" BSP (20.9mm OD) connections on the Kardier 1860 High Wall Hung Frame and Infinity Model One Low Toilet Frame—verify your supply hose is 1/2" BSP (rather than 3/8" BSP / 16.6mm OD) prior to installation.
Fitting Advice (Plastic Thread Care): Isolate the internal cistern stop valve via the flush plate access aperture and flush any debris from the supply hose first. Align the 1/2" BSP plastic thread squarely by hand before gently nipping up with a spanner—do not over-torque plastic threads.



