FixTheBog proudly supports Snoap — refillable, eco-friendly soap systems built to reduce plastic waste. Shop Snoap

FixTheBog

FixTheBog 2" Stepped Close Coupled Toilet Donut Washer 55mm x 90mm

FixTheBog

FixTheBog 2" Stepped Close Coupled Toilet Donut Washer 55mm x 90mm

SKU:
FTB13545
UPC:
5055639131835
Shipping:
Calculated at Checkout
Was: £1.68
Now: £1.19
Adding to basket… The item has been added
Item Description

 

FixTheBog 2" Stepped Close Coupled Replacement Donut Washer (55mm × 90mm)

FixTheBog Trade Spare 55mm ID × 90mm OD 2" BSP Stepped Profile

The FixTheBog 2" Stepped Close Coupled Donut Washer (55mm Inner Diameter × 90mm Outer Diameter) is a heavy-duty compressible elastomer sealing ring engineered to form a watertight seal between a close-coupled toilet cistern and WC pan inlet. Designed specifically for 2" BSP (59.6mm OD) flush valve locknuts, its precision stepped profile centres securely around the cistern outlet nut to eliminate leaks onto the bathroom floor when flushing.

Identification & Technical Guide:
Brand: FixTheBog | MPN: FTB13545  | Nominal Outlet Size: 2" BSP (59.6mm OD flush valve tail) | Exact Dimensions: 55mm Inner Diameter (ID) × 90mm Outer Diameter (OD) | Compatibility: Standard UK close-coupled ceramic WC pans & cisterns using 2" stepped donut seals

Key Features

  • Stepped Locknut Recess Profile: Internal step sits cleanly around the 2" BSP flush valve backnut, preventing lateral shifting while lowering the cistern onto the WC pan.
  • Precision 55mm ID × 90mm OD Sizing: Engineered to compress evenly into standard close-coupled ceramic pan recesses without folding or pinching.
  • High-Compliance Compressible Elastomer: Resists permanent compression set, hardening, and mineral degradation to maintain a reliable seal across slight ceramic surface irregularities.
  • Cures Cistern-to-Pan Flush Leaks: Replaces flattened, perished, or cracked donut rings that leak water down the back of the toilet pan during every flush cycle.

Installation & Compatibility Notes

Size & Removal Notice: Confirm your existing seal measures 55mm ID × 90mm OD (2" stepped style) and is NOT a smaller 1.5" BSP (47.8mm OD) washer or a flat foam/sponge donut ring. Fitting requires isolating the water supply, draining the cistern, and unbolting the cistern from the WC pan.

Fitting Advice: Clean all old rubber residue and limescale from the ceramic pan recess and flush valve backnut. Fit the stepped recess squarely over the 2" locknut, lower the cistern vertically onto the pan, and tighten the close-coupling bolts evenly side-to-side until the cistern sits stable and level—never over-tighten bolts against vitreous china, and do not use oil-based grease.

Need help figuring out if this product is right for your setup?

Send us your best bathroom selfies (or, you know, just your bathroom setup pics) to [email protected] or WhatsApp 07359 625424 us, and we'll help you flush your confusion away!

Same Day Despatch Weekdays For Orders Placed By 2pm. DHL Cut Off Weekdays Noon.