Duravit Type 380 3/8" BSP Side Inlet Float Valve — 0074112000
The Duravit 0074112000 is the authentic OEM Type 380 side-entry float filling valve manufactured by Geberit for Duravit exposed ceramic toilet cisterns. Equipped with a heavy-duty 3/8" BSP (~16.6mm OD) brass threaded inlet nipple and precision screw-adjust float, this quiet-fill valve restores rapid, reliable cistern refilling and eliminates constant water overflow caused by worn diaphragms or jammed floats.
Identification & Technical Guide:
Brand: Duravit (Manufactured by Geberit) | MPN: 0074112000 (Geberit Type 380) | Thread Size: 3/8" BSP (~16.6mm OD) Brass Side Inlet | Operating Pressure: 0.1 – 10 Bar (Flow Rate: 0.07 l/s @ 0.5 bar; 0.19 l/s @ 3 bar) | Compatibility: Duravit exposed side-inlet ceramic cisterns
Key Features
- 3/8" BSP (~16.6mm OD) Brass Inlet Shank: Corrosion-resistant solid brass threaded nipple prevents cross-threading and withstands high mains water pressures up to 10 bar.
- Precision Water Level Adjustment: Easy-turn threaded spindle allows exact calibration of the cistern cut-off water level to prevent internal overflow.
- Wide Operating Pressure Range (0.1–10 Bar): Performs reliably on both low-pressure gravity-fed tanks and high-pressure unvented/mains water supplies.
- Integrated Backflow Prevention: Built-in air-gap / backflow protection complies with UK water safety standards to protect potable water supplies.
Installation & Compatibility Notes
3/8" BSP Thread Size Notice: This valve features a European/continental 3/8" BSP (~16.6mm OD) side inlet connection—it will NOT fit standard UK 1/2" BSP (~20.9mm OD) tap connectors without a 1/2" to 3/8" reducing bush/flexi hose. Designed for side-entry cisterns only (not bottom-entry).
Fitting Advice: Isolate the water supply, drain the cistern, and unthread the old side-entry fill valve. Ensure the rubber sealing washer is positioned squarely against the inside wall of the ceramic tank, tighten the outer locknut firmly without over-torquing against the porcelain, and ensure the float moves freely without touching the cistern wall or flush valve.
Compatible Cisterns & Associated Spares
- Compatible Cistern Ranges: Duravit Exposed Ceramic Side-Inlet Cisterns (including Starck, Happy D, Vero, DuraStyle, and D-Code side-entry close-coupled tanks)
- Service Diaphragm Washer: Geberit Type 380 / Unifill Replacement Diaphragm Washer (240.771.00.1)



