Cotherm Replacement for Telford Tempest 14 Inch Immersion Heater Incoloy Hard Water Areas BEAB Approved 3Kw 1 3/4 BSP Dual Safety ROHS En 60335-2-73 Approved

Calculated at Checkout
Was: £56.70
Now: £45.00

Currently Out of Stock

Product Description:

Telford Tempest 14 Inch Immersion Heater Incoloy Hard Water Areas Beab Approved 3Kw 1 3/4 Bsp Dual Safety Rohs En 60335-2-73 Approved Rohs Compliant


TELFORD Tempest 14 inch Immersion Heater INCOLOY (Hard Water Areas) BEAB Approved 3KW 1 3/4 BSP Dual Safety RoHS EN 60335-2-73 Approved RoHS compliant

Complies with European safety standard, EN 60335-2-73

3KW 240volt

1 3/4 inch thread BSP

Guaranteed 12 months, providing correctly installed and only subject to Normal operating conditions

Stainless Steel Cylinders

The manufacturers of Stainless Steel Cylinders all now advocate that ONLY INCOLOY OR Titanium elements WITH AN INCOLOY THERMOSTAT POCKET are fitted. You will find a guarantee exception if one is NOT fitted, then the cylinder warranty will become invalid. The main reason for needing an element with an INCOLOY thermostat pocket instead of the normal copper one, is that there can be electrolytic reactions between the copper and the stainless steel.

in Hard Water Areas Titanium should be used.

Part P disclaimer regarding fitting of Immersion Heaters and thermostats.

It is a legal requirement that these units are fitted by a competent and suitably qualified person in accordance with Part P of the Building regulations and that installations are compliant with all local, national rules and the IEE wiring regulations.