27" Immersion Heater TITANIUM (Severe Hard Water Areas) including 18" TITANIUM Thermostat BEAB Approved 3KW 2 1/4 BSP Dual Safety RoHS EN 60335-2-73

SKU:
FTB833
UPC:
045445321037
Shipping:
Calculated at Checkout
£30.66
Product Description:

27" Immersion Heater TITANIUM including 18 inch EURODUAL Thermostat

BEAB Approved

3KW Dual Safety

RoHS compliant

Registration number E9573 BS EN ISO 9001

Approved - Registration number 9902479 3KW

Guaranteed 12 months, providing correctly installed and only subject to Normal operating conditions

TITANIUM heater AND thermostat Dual Safety Thermostat EURODUAL Anti - Corrosion

Beware of TITANIUM immersion heaters with copper thermostats at lower prices; These are not suitable for hard water areas or stainless steel cylinders Stainless Steel Cylinders.

The manufacturers of Stainless Steel Cylinders all now advocate that ONLY INCOLOY OR Titanium elements WITH AN INCOLOY THERMOSTAT POCKET are fitted.

You will find a guarantee exception if one is NOT fitted, then the cylinder warranty will become invalid.

The main reason for needing an element with an INCOLOY thermostat pocket instead of the normal copper one, is that there can be electrolytic reactions between the copper and the stainless steel.

Hard Water Areas in areas of harder water, INCOLOY is recommended for use due to the resistive properties.

In severe water areas Titanium should be used.

The warranty will NOT be honoured if the wrong type of element has been found to be fitted in an area of hard water

Note: Picture shows 14 inch