Banico 2-Port Motorised Zone Valve Head – Fits 22 mm & 28 mm Valves
Direct Replacement Honeywell Compatible Manual Override 5-Wire Connection
The Banico 2-Port Motorised Zone Valve Head is a convenient, cost-effective direct replacement for popular Honeywell, Tower, and Horstmann valve heads. Designed to fit 22 mm and 28 mm 2-port valves, it matches Honeywell’s dimensions and wiring layout — allowing straightforward installation without draining the system.
Product Features
- Compatible with 22 mm & 28 mm 2-port valves
- No drain down required – simply replace the head
- Identical design, dimensions, and wiring to Honeywell models
- Manual lever override for system filling and testing
- Switch rating: 3 Amp @ 240 V AC
- Voltage supply: 240 V AC
- EN 61000-6-3:2001 / CE approved
- Only suitable for 5-wire connections (not 6-wire)
Compatible Models
- Honeywell V4043H1056, V4043H1106, V4043C1156, V4043H1007, V4043H1080
- Replaces Banico, Tower, and Horstmann equivalents
- Compatible with British Gas no. 378452
- Honeywell valves made before 1987 require conversion kit 40003918-006
- Valves made after 1987 can be identified by a bump on top of the powerhead
Installation Guidance: When switching the actuator into manual mode, move the lever slowly and gently to prevent slipping the internal gears. The head should sit flush on the valve body — slight adjustment may be needed. Designed to fit securely using alignment grooves built into the valve mechanism.
Note: This actuator is not compatible with 6-wire Honeywell valves unless the unused white wire has been safely isolated. Please ensure your existing setup matches the models listed above before installation.
Manufacturer: Banico | Model: 2-Port Zone Valve Head | Voltage: 240 V AC | Connection: 5-wire (Honeywell-compatible) | Fits: 22 mm & 28 mm 2-Port Valves