Industrial Farm Commercial 3/4 OUTSIDE TAP KIT Complies with Water Regulations
THIS KIT COMES COMPLETE WITH :-
1 X 3/4 HOSE UNION OUTSIDE TAP with Double Check Valve
3 X 2" X 8 BRASS COUNTERSUNK SLOTTED FIXING SCREWS.
3 X BROWN PLASTIC PLUGS
1 X ROLL PTFE TAPE
1 x 22mm x 3/4 Brass Wall plate
If this kit is not exactly what you need ; Check out my other items!
The Kit provides a professional way to add a outside garden tap
We have found this kit allow the average DIY person to fit a outside tap; This kit is superior to many of the kits sold in DIY stores, eBay or Amazon which have self tapping tee's which often in 18months tend to leak
If you do not find what you are looking for we are happy to vary components, email us at firstname.lastname@example.org
These kits give a professional finish, the through the wall flange has several advantages over the wall plate type fixing
There is no exposes pipe work to freeze in winter
The PTFE tap and tap can be tightened onto the flange before fitting, making sure it a good fit and vertical
The kit can be used on modern 15mm or old 1/2 inch copper
The isolation valve should be fitted above the lever of the outside tap to ensure that during the winter months the garden tap can be turned off and outside tap opened. This will prevent the outside tap freezing
Please note certain plastic items colours may vary.